PM-P314D DC SHUNT MOTOR COUPLED WITH AC SYNCHRONOUS ALTERNATOR TRAINER

Description

SCOPE OF LEARNING:

• Study of DC Shunt Motor to AC Alternator
• TECHNICAL SPECIFICATIONS:

Power Supplies:

• Operated on Mains power 230V, 50Hz +10%

Module-1

• 2 Pole MCB of 230V, 5A
• 1Phase Power Indication with Red Indicator
• Inbuilt Contactor 230V,50Hz/11VA Coil
• Emergency Stop to Emergency Break

Module-2

• Digital Voltmeter (DC For Shunt Motor)
• Digital Ammeter (DC For Shunt Motor)

Module-3

SCR ACTUATOR (Variable DC Drive) MODULE

l Full Bridge SCR Based 0-195V, 3A Cosine firing with Linear Characteristics

l Support Signal Conditioning Circuit for Speed, Torque in Kg. weight to output 0-2.5VDC.

l 2Nos. of these supplies required for DC Armature and DC Motor field.

l Digital Ammeter (DC For Shunt Motor for Field Current)

Module-4

• Digital Voltmeter (AC For Alternator)
• Digital Ammeter (AC For Alternator)

Module-5

• DC Power Supply 0-230V, 2A For Field (Switch Controlled)
• Digital Ammeter (DC For Alternator for Field Current)

Module-6

• Schematic Diagram For Prime Mover with Test Points

Module-7

• Schematic Diagram For Generator with Test Points
• 3Phase Output Taken Out through 4Pole MCB 415V,5A
• 3Phase Power Indication with R-Y-B Indicator

Module-8

• Digital Voltmeter (AC For Alternator)
• Digital RPM Indicator (With Probe)

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
• The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
• Instruction manual.
  • 3 Phase Power Indication With 25mm Colored Indicators
  • Patch Cords 4mm (Heavy Duty)
  • High Voltage Test Points are Provided With 4mm Safety Sockets
  • Protection with Emergency Stop.
  • Short Circuit protection with the MCB.
  • Size of the trainer set 48”x16”

MOTOR GENERATOR  SPECIFICATIONS:

• DC Motor 1.5HP, 230V and AC Alternator 415V (1KVA).

SCOPE OF SUPPLY:

• DC to AC Alternator  Control Panel Trainer
• DC Motor Coupled to AC Alternator
• Rheostat (For Field Control) 300 Ohm,2A
• 3Phase Resistive Load (Optional)

PM-P314 DC SHUNT MOTOR COUPLED WITH AC ALTERNATOR SCOPE OF LEARNING: Study of Dc Shunt Motor Coupled With Ac Alternator MOTOR RATING: Dc Shunt Motor 1.5Hp Coupled With Ac Alternator 1KVA   MOTOR SPECIFICATIONS: DC Shunt Motor 1.5HP Operating Voltage:230V Type: DC RPM: 1440 RPM. Wattage: 1.1KW Terminations: 4 BTI 15 Terminals Shaft: Single Frame:132 B3 SPDP 1P23 1C01 Solid Yoke Extension Fitted on Metal Base. GENERATOR SPECIFICATIONS: AC Alternator 1KW Operating Voltage:415V Type: AC RPM: 1440 RPM. Wattage: 1KW Terminations: 5 BTI 15 Terminals Shaft: Single Frame:132 B3 SPDP 1P23 1C01 Solid Yoke Extension Fitted on Metal Base.

PM-P277 3PHASE RESISTIVE LOAD (3KW)  TECHNICAL SPECIFICATIONS: 3 Control switches given board for current control for Each Phase Each switch controls 1A current. 9 Nos of Rheostats are mounted inside the cabinet having value of 1A. Rating of Rheostats are 440Ohm,1A at 415V Current Meter is provided for Load Measurement Operating Voltage 415V, 50Hz AC (3Phase) SALIENT FEATURES: Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols. Instruction manual. 3 Phase Indications with 25mm Multi Colored Indicators. Patch Cords 4mm (Heavy Duty) High Voltage Test Points are Provided With 4mm Safety Sockets The trainer is housed in Metal cabinet. Short Circuit protection with 4Pole MCB. Size of the trainer set 18”x24” Easy to move as wheels are given

Technical Details