Different Microcontroller/Processor Training and Development Platform For AVR ,PIC ,ARM and Arduino
AVR Development Board
It has built in power supply circuit,16x2 LCD support, RS232 port for serial interface with PC/Serial devices, a 10 pin ISP header to connect AVRDUDE programmer. The board provides port extensions for all ports using berg pins. The board is compatible with the Atmega16, Atmega32 and other compatible 40 pin AVR microcontrollers. Use this board to kick start development based on AVR Microcontrollers. The board lets you concentrate on programming, testing and optimizing your code, and thereby your overall project, rather than spending time in getting to know the electronics required to use these microcontrollers. This board is perfect for learning, testing and development. Contact No:- 9825568628, 9825566723 Email:-firstname.lastname@example.org web:-pmenterprise.info
PIC Development Board
The PIC16F877A Development Board can be used to evaluate and demonstrate the capabilities of Microchip PIC16F877A microcontroller. The MCU socket on board provides support for 40 pin DIP package of PIC16F877A controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the ePIC16F877A Development Board you will find it to be one of the best development tool available for PIC16F877A controller. Here below you will find the key features of this product.
LPC2148 Development Board
The all New LPC2148 Development Board can be used to evaluate and demonstrate the capabilities of NXP LPC2148 microcontrollers. All I/O pins are broken out on Male Berg strips to enable easy connection with sensors. Onboard Mini Bread board is provided for training and development purposes. Onboard 2mm pitch Female sockets on bottom side to insert Zigbee module ,easy to interface and experiment them . All I/O pins and Power pins (5V & 3V3) are made available at header pins to ease the wiring . The development board can be programmed by ISP Programmer or separate JTAG programmer/ debugger. 20 pin FRC male connector is provided to connect JTAG programmer. In ISP Programming mode, user can select the desired interface (Either USB or RS232) using the onboard jumper selection. Jumpers are provided to select Automatic or Manual ISP Programming mode.
Arduino Uno Board
Arduino Uno is a microcontroller development board based on the Atmel ATmega328 MCU. The Arduino Uno has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. This Arduino MCU board contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Arduino Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter. The Arduino Uno MCU board can be powered via the USB connection or with an external power supply. The power source is selected automatically