skip navigation

Product Detail

Home / Product Details
Manufacturers and Traders

Product Overview

PM-P496A SOLAR POWER GENERATION AND TRAINING SYSTEM


Discription:

SCOPE OF LEARNING:

1.Measurement and Analysis of Different parameters of Solar PV Module

  •  a. Open circuit voltage (Voc) and short circuit current (Isc) of Solar PV module
  • b. Parameters measurement with parallel Solar PV modules
  • c. Parameters measurement with series Solar PV modules
  • d. I-V characteristics of PV Module and PV Array
  • e. Power curve of PV Module and PV Array
  •  f. Efficiency
  • g. Fill Factor
  • 2. Understanding & estimating Solar PV system
  • 3. Load Estimation and calculation
  • 4. Understanding units kVA and kWatt for Inverter and Solar PV Modules
  • 5. Study of charge controller
  •     6. Study of different parameters of Inverter
  • a. Efficiency measurement
  • b. PWM switching technique
  • c. Charging of batteries
  • d. Protection like over load and low battery
    • 7. Analysis and calculate the system efficiency and losses at different stages
    • 8. Analysis of electricity generation from Solar PV system
    • 9. Analysis of battery backup at different load
    • 10. Study the Batteries and their specification Testing of battery using gravity hydrometer
    • 11. Analysis the effect of dust on Solar PV module
    • 12. Analysis of effect of temperature on Solar PV Module
    • 13. Study of different parameters of Inverter
    • a. Efficiency measurement
    • b. PWM switching technique
    • c. Charging of batteries
    • d. Protection like over load and low battery
      • 14.Study about safety and precaution for installation of Solar system
      • TECHNICAL SPECIFICATIONS:

Power Supplies:

  • Operated on Mains power 230V, 50Hz +10%

Digital/Analog Meters:

DC Voltmeter : 0-300V

DC Ammeter : 0-40A

Multi Function Meter

  • Voltage-10-230V
  • Current-100mA-5A
  • Watt-10-1200W
  • Energy meter
  • Display Resolution- 0.001kWh
  • Frequency-50Hz

Components are mounted on the panels are:

  • Power And Charge Controller Unit (Solar)
  • DC to AC Converter (Inverter)
  • Single Phase Lamp Load Switched Control.

SYSTEM INCLUDES:

  • 250Wp Solar panel: 4 Nos.  
  • Battery 100Ah: 4 Nos.
  • Charge Controller: 1 No.
  • Inverter : 1kVA
  • Control panel for experiments equipped with meters, connecting terminals and switches

SOLAR PANEL:

  • Pm : 250Wp
  • Voc : 43V
  • Isc : 7.75A
  • Vmp: 35V
  • Imp : 7.14A
  • Qty : 4Nos.

CONTROL PANEL WITH INVERTER:

  • Capacity: 1000VA
  • Input Voltage: 190~260V AC
  • Output Voltage on Mains mode: same as input
  • Output Voltage on UPS mode: 210~245V
  • Output Frequency on UPS mode: 50Hz ±0.1Hz
  • Output waveform on Mains mode: same as input
  • Output waveform on UPS mode: Modified Sine wave
  • Battery Charging Current: 12A
  • Efficiency at full load : >80% UPS Overload/UPS Short circuit: Yes
  • Technology: Microcontroller based
  • MCB: C Type 16A-1nos

SALIENT FEATURES:

  • Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
  • The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
  • Instruction manual.
  • Patch Cords 4mm (Heavy Duty)
  • High Voltage Test Points are Provided With 4mm Safety Sockets
  • Short Circuit protection with the MCB.
  • Size of the trainer set 48”x24”

BATTERY:

  • Solar Battery Capacity : 12V/100Ah
  • Type : C10
  • Qty: 2 Nos.

CHARGE CONTROLLER:

  • Solar PV Module : 24–50V
  • Current : 40A
  • Battery voltage : 24V
  • Technology : PWM based MPPT
  • Charging Stage : Bulk, Absorptions and Float

Optional Requirement:

  • Rheostat : 50Ohm 15A  1Nos

SCOPE OF SUPPLY:

  • Solar Power Generation Trainer
  • Battery Bank
  • Solar Cell Panels
  • Stand For Holding the Solar Panels
  • Inverter (Inbulit)

Category:
GREEN-&-RENEWABLE-ENERGY
Product Name:
PM-P496A SOLAR POWER GENERATION AND TRAINING SYSTEM
Model Number:
PM-P496A
Download PDF:
No Catalog Attached