Description:
SCOPE OF LEARNING:
- Study of DC Shunt Motor to AC Alternator
- TECHNICAL SPECIFICATIONS:
Power Supplies:
- Operated on Mains power 230V, 50Hz +10%
Module-1
- 2 Pole MCB of 230V, 5A
- 1Phase Power Indication with Red Indicator
- Inbuilt Contactor 230V,50Hz/11VA Coil
- Emergency Stop to Emergency Break
Module-2
- Digital Voltmeter (DC For Shunt Motor)
- Digital Ammeter (DC For Shunt Motor)
Module-3
SCR ACTUATOR (Variable DC Drive) MODULE
l Full Bridge SCR Based 0-195V, 3A Cosine firing with Linear Characteristics
l Support Signal Conditioning Circuit for Speed, Torque in Kg. weight to output 0-2.5VDC.
l 2Nos. of these supplies required for DC Armature and DC Motor field.
l Digital Ammeter (DC For Shunt Motor for Field Current)
Module-4
- Digital Voltmeter (AC For Alternator)
- Digital Ammeter (AC For Alternator)
Module-5
- DC Power Supply 0-230V, 2A For Field (Switch Controlled)
- Digital Ammeter (DC For Alternator for Field Current)
Module-6
- Schematic Diagram For Prime Mover with Test Points
Module-7
- Schematic Diagram For Generator with Test Points
- 3Phase Output Taken Out through 4Pole MCB 415V,5A
- 3Phase Power Indication with R-Y-B Indicator
Module-8
- Digital Voltmeter (AC For Alternator)
- Digital RPM Indicator (With Probe)
SALIENT FEATURES:
- Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
- The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
- Instruction manual.
- 3 Phase Power Indication With 25mm Colored Indicators
- Patch Cords 4mm (Heavy Duty)
- High Voltage Test Points are Provided With 4mm Safety Sockets
- Protection with Emergency Stop.
- Short Circuit protection with the MCB.
- Size of the trainer set 48”x16”
MOTOR GENERATOR SPECIFICATIONS:
- DC Motor 1.5HP, 230V and AC Alternator 415V (1KVA).
SCOPE OF SUPPLY:
- DC to AC Alternator Control Panel Trainer
- DC Motor Coupled to AC Alternator
- Rheostat (For Field Control) 300 Ohm,2A
- 3Phase Resistive Load (Optional)
| |
PM-P314 DC SHUNT MOTOR COUPLED WITH AC ALTERNATOR
SCOPE OF LEARNING:
- Study of Dc Shunt Motor Coupled With Ac Alternator
MOTOR RATING:
- Dc Shunt Motor 1.5Hp Coupled With Ac Alternator 1KVA
MOTOR SPECIFICATIONS:
- DC Shunt Motor 1.5HP
- Operating Voltage:230V
- Type: DC
- RPM: 1440 RPM.
- Wattage: 1.1KW
- Terminations: 4 BTI 15 Terminals
- Shaft: Single
- Frame:132
- B3
- SPDP
- 1P23
- 1C01
- Solid Yoke Extension
- Fitted on Metal Base.
GENERATOR SPECIFICATIONS:
- AC Alternator 1KW
- Operating Voltage:415V
- Type: AC
- RPM: 1440 RPM.
- Wattage: 1KW
- Terminations: 5 BTI 15 Terminals
- Shaft: Single
- Frame:132
- B3
- SPDP
- 1P23
- 1C01
- Solid Yoke Extension
- Fitted on Metal Base.
|
| |
PM-P277 3PHASE RESISTIVE LOAD (3KW)
TECHNICAL SPECIFICATIONS:
- 3 Control switches given board for current control for Each Phase
- Each switch controls 1A current.
- 9 Nos of Rheostats are mounted inside the cabinet having value of 1A.
- Rating of Rheostats are 440Ohm,1A at 415V
- Current Meter is provided for Load Measurement
- Operating Voltage 415V, 50Hz AC (3Phase)
SALIENT FEATURES:
- Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
- Instruction manual.
- 3 Phase Indications with 25mm Multi Colored Indicators.
- Patch Cords 4mm (Heavy Duty)
- High Voltage Test Points are Provided With 4mm Safety Sockets
- The trainer is housed in Metal cabinet.
- Short Circuit protection with 4Pole MCB.
- Size of the trainer set 18”x24”
Easy to move as wheels are given
|
